Canon PIXMA G1110 Serie Guía De Inicio página 5

6
Pour all ink into the ink tank.
Confirm that the ink has been filled to the upper
limit line (A).
7
Replace the tank cap securely.
8
Close the ink tank cover.
9
Repeat steps 2 to 8 to pour all ink into the
corresponding ink tanks on the right according to
the label.
Confirm that the ink has been filled to the upper
limit line (A).
10
Close the top cover.
6. Preparing the Ink System
1
Press the RESUME/CANCEL button, and then
confirm that the ON lamp has changed from lit to
flashing.
(A)
Ink preparation takes about 5 to 6 minutes.
Proceed to the next page.
When a lamp is flashing
The Alarm lamp is flashing
Count the number of flashes to determine the cause
of the problem.
• 4 times
The cartridges are not installed correctly.
"3. Installing the Cartridge" on page 1
• 5 times
No cartridges are installed.
"3. Installing the Cartridge" on page 1
• 9 times
The protective materials are not removed.
"2. Removing Packing Materials" on page 1
The ON lamp is flashing
Preparing the ink system. This may take about 5 to 6
minutes. Proceed to the next page.
The ON lamp and Alarm lamp flash alternately 8
times
(A)
Ink is not prepared normally.
Press the ON button to restart the printer, and then
redo the procedure from "5. Pouring Ink" on page 2.
For all other cases, refer to the Online Manual.
3