Installation Instructions - Utilitech 090EPP307 Manual Del Usuario

INSTALLATION INSTRUCTIONS

Pump must be installed in a suitable basin
1.
(not included), which must be at least 11 in. wide
and no more than 24 in. deep for pump fitted
with vertical on/off switches.
2. Place pump on a hard surface inside sump
basin. Make sure surface is clear of debris.
NOTE: Never place the pump on clay, earth
or gravel surfaces. It is recommended that the
pump be placed on two bricks (not included)
approximately 2 in. apart.
3. Connect the discharge pipe, fittings, and
check valve (not included) to the discharge
port of the pump.
NOTE: It is recommended that the
discharge pipe diameter be equal to or
larger than the discharge size of the pump.
NOTE: Pump has a built in weep hole to
prevent air lock. No need to drill another
one in PVC discharge pipe.
1
Sump
basin
2
3
Discharge
port
6
Inlet
24 in.
pipe
M ax .
Depth
11 in. W
A
2 in.
Discharge
pipe
A
Lowes.com