WATER SUPPLY
(Cold Water Only)
CAUTION
When connecting the water inlet to the
water supply mains, local regulations of
your water company must be observed.
In some areas the unit must not be con-
nected directly to the public drinking wa-
ter supply. This is to ensure that there is
no feedback of chemicals into the water
supply. Direct connection via a receiver
tank or backflow preventer, for example,
is permitted.
Dirt in the feed water will damage the
unit. To avoid this risk, we recommend
fitting a water filter.
Garden hose must be at least 3/4
inch in diameter.
Flow rate of water supply must not
fall below 6,6 GPM (gallons per
minute).
Flow rate can be determined by run-
ning the water for one minute into an
empty 5-gallon container.
The water supply temperature must
not exceed 86°F/30°C.
Never use the pressure washer to
draw in water contaminated with sol-
vents, e.g. paint thinners, gasoline,
oil, etc.
Always prevent debris from being
drawn into the unit by using a clean
water source.
SAVE THESE
INSTRUCTIONS!!
Safety Alert Symbols
DANGER
indicates "an imminently hazardous sit-
uation which, if not avoided, will result in
death or serious injury."
WARNING
indicates "a potentially hazardous situa-
tion which, if not avoided, could result in
death or injury."
CAUTION
indicates "a potentially hazardous situa-
tion which, if not avoided, may result in
minor or moderate injury or in property
damage incidents."
Owner/User Responsibility
The owner and/or user must have an
understanding of the manufacturer's
operating instructions and warnings be-
fore using this pressure washer.
Warning information should be empha-
sized and understood.
If the operator is not fluent in English,
the manufacturer's instructions and
warnings shall be read to and discussed
with the operator in the operator's native
language by the purchaser/owner, mak-
ing sure that the operator comprehends
its contents.
Owner and/or user must study and
maintain for future reference the manu-
facturers' instructions.
7
English