Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3 . USE
Place the toaster on a flat, even surface . Check that the crumb
collector is installed and connect the appliance . Insert bread in the
slot and press the lever . To stop the toaster before the end of the
cycle, press Stop or raise the lever .
N .B . Model CPT180AR features 2 separate control sets, allowing
you to toast 2 types of bread at the same time . If you wish to toast
4 slices, both control sets must be used .
A. Setting the browning level of the slice
Turn the control button on the desired level .
The browning of your toasts varies depending on the type of bread
and degree of humidity of the slices . As a general rule, for medium
toasting, set your toaster on level 4-5 to toast denser bread or fresh
bread and on 2-3 for toasting stale bread .
B. Using the various settings
By using the various settings Toast
you adjust the necessary time depending on the type of bread
and toasting level desired . Each setting can be combined with the
browning level control button . For your facility a light indicator
shows the selected setting .
Adds the amount of time necessary to toast more, or to toast
bread rolls or thicker slices .
Adds the time necessary to first defrost the bread, then toast it .
Allows to heat up your toasts, without toasting them a second
time .
N .B . If you wish to cancel the selection, press Stop . This will stop
the cycle and raise the bread .
A few tips...
1 . Bread rolls, muffins or thick slices should be toasted longer . We
recommend to use the
according to your preferences .
2 . To toast croissants, cut them in half horizontally and select the
setting . To reheat them only, use the
3 . When toasting fruit breads, remove any loose fruits from the
surface of the bread in order to prevent fruit pieces from falling
into the toaster or sticking on the guide wires in the slot .
4 . If you are toasting a single slice of bread, set the heat selector
to a lighter setting than you normally would .
, Defrost
and Reheat
setting, then to set the toasting level
setting .
4 . MAINTENANCE AND STORAGE
Let the appliance cool down completely and disconnect it before
cleaning . Wipe the the outside of the toaster with a clean damp
cloth, then dry it carefully .
To remove crumbs, slide out the crumb tray and throw the
breadcrumbs away, then put the crumb collector back in place . Do
not use the toaster without the crumb collector .
To remove pieces remaining in the toaster, turn it upside down and
shake gently to cause the pieces to drop . Never insert a knife or
any sharp object in the toaster as this could cause damage .
4
Tabla de contenido
