Uline H-5759 Manual Del Usuario página 7

3. Place light steel beam (11) at desired depth
underneath brackets. Fasten to brackets (10) with
two 4¾" bolts and flange nuts. (See Figure 18)
NOTE: 48" light kit does not include steel beam.
Skip to 4b.
Figure 18
4¾"
Bolt
Flange Nut
4a. For 60, 72 and 96" Light Kits: Place two "S" hooks (12)
at desired mounting points along the steel beam
and secure with two flange nuts. (See Figure 19)
Figure 19
4b. For 48" Light Kits: Place two "S" hooks (12) at desired
depth underneath bracket. Fasten to brackets (10)
with two flange nuts. (See Figure 20)
Figure 20
5. Attach hanging chains to LED shop light (9) and
mount to "S" hooks. (See Figure 21)
Figure 21
PAGE 7 OF 27
OPTIONAL ACCESSORIES CONTINUED
4¾"
Bolt
Flange Nut
SHELF DIVIDER ASSEMBLY
1. Line up front "C" channel of divider (13) with front
lip of top shelf. Insert divider into front lip at angle.
Once in place, allow divider to drop and magnetize
to back shelf lip. (See Figure 22)
Figure 22
Back
Shelf Lip
Front
Shelf Lip
LEG OUTLET ASSEMBLY
NOTE: Mounting hardware comes pre-installed
in outlet.
1. Remove top and bottom
screws from outside facing
oval outlets. (See Figure 23)
2. Insert outlet (14) into
workbench leg cut outs with
the oval outlets facing the
outside of the leg assembly.
Secure to leg assembly with
the two screws removed in
step one. (See Figure 24)
Figure 24
Front "C"
Channel
Figure 23
0121 IH-5759