Disposing of the Batteries
To see a video of how to remove the batteries, check out support.BISSELL.com.
Before proceeding, ensure that:
• the machine is disconnected from the charger
• the Formula Tank, Dirty Water Tank, nozzle and brush have been removed from machine (see
removal instructions on pages 4, 7-8)
• you have a flat-head and Phillips screwdriver, required for disassembly
1.
Remove the cover on the
base of the machine by using a
flat-head screw driver.
4.
Remove product rating
label. Pull open the housing
on the base of the machine in
opposite directions. Disconnect
and remove the entire battery
assembly. Keep battery
assembly together – DO NOT
separate individual batteries.
NOTE: Disconnecting the battery will destroy the appliance and invalidate the warranty.
WARNING
and State regulations, removal and proper disposal of lithium-ion batteries is required. For removal of the
batteries in your Pet Stain Eraser™, see instructions on this page. For specific disposal instructions of batteries,
please contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit Call2Recycle.org.
2.
Remove the screw near the
LED window using a Phillips-
head screwdriver. Then,
remove entire top handle
portion from machine by using
a flathead screwdriver.
This product contains lithium-ion rechargeable batteries. According to Federal
3.
Using a Phillips-head
screwdriver, remove seven
screws in the locations
referenced in the image.
BISSELL.com 9