Fm Radio - auna DABStep Manual Del Usuario

Radio digital
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
24

FM RADIO

Switch the device on and press MODE repeatedly to select FM mode:
Display
The symbol in the upper right corner indicates the strength of the
received FM signal.
Below the clock, the currently tuned in station is displayed by name. The
lower line is reserved for additional information received through the
FM / RDS signal.
Press < / >, to tune up/down in steps of 0.05 Hz. Press SCAN for scanning
the FM band up to the next found station.
Press and hold MENU/INFO on the device, or MENU on the RC, to launch
the FM menu. There are two additional items to the menu as when launched
from another mode:
Scan Setting: Set the sensitivity of the automatic scan, so either all staions
will be found and tuned in, or only stations emitting a stron signal will be
tuned in.
Audio Settings: Toggle MONO / STEREO reception here.
Station presets:
Press the STAR button on the RC, or press and hold MENU/INFO to go
to the menu and select „Preset Store".
Use < / >, to select the desired preset location and confi rm with OK/
SELECT. The station currently tuned in will be saved to the selected
preset.
There are 10 presets available for each, FM and DAB radio stations.
Press the STAR button on the RC, or press and hold MENU/INFO to go
to the menu and select „Preset Recall" to choose from previously saved
stations.
The number buttons 1-10 on the RC can be used to directly tune in
stations previously saved to the corresponding presets.
Tabla de contenido
loading

Este manual también es adecuado para:

100227821002910610029107Dabstep

Tabla de contenido