Idiomas disponibles
Idiomas disponibles
Left Side burner
[]
Remove plastic packaging from side burner valve. Remove side burner grate from within side
burner shelf.
[]
Connect flat igniter wire tip to the igniter pin on the side burner valve. (A & B)
[]
Remove the 2 pre-installed screws from the valve control stem and set them aside. (C)
[]
Loosen the side burner to insert gas valve. To loosen, remove the two screws on front bracket,
and loosen the rear bracket screws halfway. (D&E)
[]
Insert the gas valve into the side burner (F), and insert the valve control stem through the hole
in shelf fascia. (I)
[]
Replace side burner front bracket and tighten in place with 2 previously removed screws. (G)
Tighten screws on back bracket. (H)
[]
Attach bezel to fascia and valve control stem with the 2 previously removed valve control
stem screws (I).
[]
Pushcontrol knob onto side burner valve stem. (J) Replace side burner grate. (K)
[]
Connect the round igniter wire tip to the pin on the white electrode
protruding from the
bottom of the side burner shelf. (L)
24 ° 146.03358410
