Using The Beaters; Using The Chopper Attachment - Cuisinart CSB801E Instrucciones

D. USING THE BEATERS
• To attach the beaters, align the motor housing with the adaptor
and turn anti-clockwise to secure into place.
• Insert the beater into the two holes on the adaptor and push
until they click into place.
• Plug cord into the mains.
• Place the appliance into mixture that will be beaten.
• With the speed dial set to minimum, press and hold the ON/
OFF button. The appliance will continue to run as long as the
switch is pressed in. To turn the appliance off , release the ON/
OFF button and the motor will stop.
• Use the variable speed control dial on top of the motor housing
to increase the speed. For an extra burst of power, press the
"Turbo" button on the front of the housing above the ON/OFF
button.
• Unplug immediately after use.
16
E. USING THE CHOPPER ATTACHMENT
• Use the chopper attachment for chopping meat, vegetables and
dried fruit.
• Put the appliance on a stable, fl at surface. Take the chopper
blade and place it into the centre of the Chopper Bowl.
• Add ingredients into the Chopper Bowl.
N.B. Make sure that larger parts of food are cut into small pieces
of even size.
• Put the lid on the Chopper Bowl and push gently until it fi ts
tightly.
• Attach the Motor Housing to the lid and turn in a clockwise
direction until it is securely in place.
• Plug cord into the mains.
• Switch on the appliance and hold fi rmly during the chopping
process. When the chopping task is complete, press the ON/OFF
button then inplug from the outlet.
• Remove the Motor Housing from the Chopper lid.
• Remove Chopper lid from the Chopper Bowl; then remove
Chopper Blade carefully. Refer to the following table for
chopping guide.