Preliminary Remark; Target Group; Use According To The Intended Purpose - Kübler Sendix 58 FS2 Serie Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Classification:
This symbol, together with the signal word CAUTION, warns
against a potential danger for the health of persons.
The non-compliance with this safety instruction may lead to
slight or minor adverse health effects.
ATTENTION
Classification:
The non-compliance with the ATTENTION note may lead to
material damage.
Classification:
Additional information relating to the operation of the product,
and hints and recommendations for efficient and trouble-free
operation.

2.2 Preliminary Remark

The following basic safety instructions are intended to avoid
personal injuries and damage to property; they relate primar-
ily to the use of the products described herein. If you addition-
ally use further components, also consider their warnings and
safety instructions.
BA Sendix® 58xxFS2 / 58xxFS3 - R60049.0009 - 05
CAUTION
NOTICE

2.3 Target Group

The device may only be planned, mounted, commissioned
and serviced by persons having the following qualifications
and fulfilling the following conditions:
• Technical training.
• Briefing in the relevant safety guidelines.
• Constant access to this documentation.
• In case of electrical equipment for potentially explosive at-
mospheres, the specialized personnel needs knowledge
about the ignition protection category concept.
• For facilities in potentially explosive atmospheres, the au-
thorized person must comply with the applicable country-
specific regulations.
2.4 Transport / Storage
Check the delivery immediately upon receipt for possible
transport damages. If you do not mount the device immedi-
ately, store it preferably in its transport package.
When storing the encoder, make sure that the shaft and the
cable outlet are always free from any load.
The device must be stored at a dry and dust-free location, in
compliance with the technical data, see chapter
Technical Data [} 42].

2.5 Use According to the Intended Purpose

The encoder can be used as a rotation angle, position or
speed sensor.
EN - 35
Tabla de contenido
loading

Tabla de contenido