Maintenance And Care - AL-KO K26-S Manual Del Usuario

Maintenance and care

4. Turn firmly clockwise until the drawbar is con-
nected without play (11).
5. Loosen the anti-pivot protection (12 and 13).
6. Turn the locking pin further until the anti-pivot
protection engages (13/2,14).
If it is not possible to engage into one
slot, go back to the previous slot.
MAINTENANCE AND CARE
First inspection after 1,500 km or 6 months.
Thereafter 6-monthly or as required.
Clean and grease the locking pin.
Clean and grease the pivoting compo-
nent.
Grease recommended by AL-KO:
Multi-purpose grease as per DIN 51825 - KP
2 G-30
Multi-purpose grease as per DIN 51502 - K
2 K-30
REPAIRS
Repair work
CAUTION!
Repair work may be carried out only
by AL-KO service centres or authorised
specialist workshops.
For repairs, a region-wide network of AL-KO
service stations is available to our customers
in Europe.
Request the index of service points directly
from us at: www.al-ko.com
ADVICE
Replacement parts are safety parts!
For the installation of replacement parts
into our products, we recommend the
use of original AL-KO parts, or of parts
that we have expressly approved for in-
stallation. For the clear identification of
replacement parts, our service stations
require the replacement part identifica-
tion number (ETI).
1360108_a 7