PNI CT25WIFI Manual De Usuario página 4

when you have no device added to the application).
6. Select the Gateway Control option on the left
side of the screen.
7. From the list of devices displayed on the right
side of the screen, select Wireless Gateway.
8. Select the WiFi network you want to connect to
and add the password. Click Next.
9. In the next interface, select the EZ Mode option
in the upper right corner.
10. Then tick Confirm the indicator is blinking
rapidly. Click Next. Note: If the LED on the hub
does not flash often, press and hold the button on
the hub.
11. The application will start scanning nearby
devices.
12. After it identifies your device, you will receive
the Added Successfully confirmation.
13. To finish, click the Done button.
4