Panasonic Viera TC-L42ET5W Instrucciones De Operación página 8

Assembly screw (4)
M5 × 15
Assembly screw (4)
M4 × 25
1
Assembling the pedestal
Attach the bracket
and fix with assembly screws
●
Forcing the assembly screws the wrong way will strip
the threads.
● Hold the bracket not to fall over.
C
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation
surface.
● The place where the pedestal is to be fixed should be thick enough and made of hard material.
8
Bracket
●
TBL5ZA32821
to the tab of the top of the base
.
A
Tab (top)
D
from the TV.
from the bracket.
Base
●
TBL5ZX0268
(TC-L42ET5W)
●
TBL5ZX0270
(TC-L47ET5W)
● TBL5ZX03841
(TC-L55ET5W)
2
Securing the TV
Use the assembly screws
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
● Carry out the work on a horizontal and level surface.
Arrow mark
Hole for pedestal installation
Screw (not supplied)
Diametre
55 inches model: 4 mm
Other inches model: 3 mm
Length: 25 - 30 mm
Screw hole
to fasten securely.
B