Tabla de contenido
Idiomas disponibles
Idiomas disponibles
d)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
e)
If a fire starts, use solely powder or carbon dioxide
(CO
) fire extinguishers suitable for use on live
2
devices to put it out.
f)
Children or unauthorised persons are forbidden
from entering a work station. (A distraction may
result in a loss of control over the device).
g)
Use the device in a well-ventilated space.
REMEMBER! When using the device, protect
children and other bystanders.
2.3. PERSONAL SAFETY
a)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/ or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
b)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
2.4. SAFE DEVICE USE
a)
Before adjusting, replacing accessories, or storing
the appliance, unplug the appliance from the
power source. This will decrease the possibility of
accidentally switching it on.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device,
who have not read the user manual. The device may
pose a hazard in the hands of inexperienced users.
c)
Maintain the device in a good technical state.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
g)
When transporting and handling the device between
the warehouse and the destination, take into account
the occupational health and safety principles for
manual transport operations which apply in the
country where the device will be used.
h)
It is forbidden to move, adjusting and rotating the
device in the course of work
i)
Clean the device regularly to avoid a durable
encrustation of dirt
j)
Do not cover the air intake and outlet
k)
ATTENTION! DANGER TO LIFE! While cleaning, never
immerse the device in water or other liquids.
l)
Do not store heavy, poisonous or corrosive objects
in the device.
m)
Do not use the appliance in unheated rooms and in
locations with high air humidity.
n)
ATTENTION! Do not use any electrical appliances
inside the chamber of the appliance which serves to
store food.
o)
PLEASE NOTE The device contains flammable
substances. Consequently, it should be handed over
for disposal to specialists when its service life is over.
p)
It is not allowed to store potentially explosive
substances in the appliance, e.g.: cans containing
compressed flammable gas.
8
q)
It is forbidden to place the device near an open
flame, electric stoves, coal stoves or other heat
sources, as well as near direct sunlight. High
temperatures can damage the cooling capacity and
rise the consumption of electricity.
r)
The device must not be connected to the outlet other
than wall-mounted socket, do not use a multiple
outlet adapter or multiple sockets.
s)
If the door is opened too often, there is increased
energy consumption, which could lead to possible
damage..
t)
The power cord connected to the appliance must be
properly grounded and correspond to the technical
details!
u)
The device is not designed for store objects on it.
v)
Do not place heavy objects on the device.
w)
Keep packaging elements and small assembly parts
in a place not available to children.
x)
There is a risk of a child getting stuck inside the
device. Before storing the device withdrawn from
use, it is necessary to dismantle the door and to
leave the shelves in their place, so that children
cannot easily enter the interior..
y)
The device is not a toy. Children should be supervised
so that they will not play with the device.
z)
ATTENTION! The ventilation openings of the
appliance should always be free from blockages.
aa)
Please make sure that the device is properly earthed.
bb)
Take care not to damage any parts of the device,
in particular those containing the refrigerant. If the
refrigerant comes into contact with the user's eyes, it
may cause serious eye damage.
cc)
Please note: Do not hold the device by its door
during transport. The device should be transported
in a vertical position. Do not tilt the device.
3. USE GUIDELINES
The device is used for cooling and storing food products.
The user is liable for any damage resulting from
nonintended use of the device.
3.1. DEVICE DESCRIPTION
3
5
4
2
6
1
B
A
Rev. 11.04.2019
1.
Handle
2.
Glass door
3.
Hinges
4.
Seal
5.
Shelf
6.
Controller
A.
Light switch I/O (ON / OFF)
B.
Temperature regulation
3.2. PREPARING FOR USE
After unpacking the device, check its technical condition.
Set the device in an upright position. In order to level the
device, it is necessary to use adjustable legs. The device
is a free-standing device and is not suitable for durable
furniture integration. There should be at least 10 cm
distance between each side of the device and the wall or
other objects. Keep the device away from hot surfaces.
The device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Install the device making sure that
constant access to the main plug is ensured. The device can
be placed with a rear panel to the wall. To ensure adequate
air circulation, the ventilation openings at the back of the
device must not be blocked.
3.3. DEVICE USE
Control panel:
•
The knob on the control panel has the following
adjustment functions:
»
increasing the cooling power if it is turned
clockwise (MAX),
»
decreasing the cooling power if it is turned
counter clockwise (0 = no cooling).
To set the right temperature using the knob, it is
recommended to use a flat-ended tool, such as
a screwdriver.
The mark in the drawing (MAX, 0) is not physically
located on the control panel, it is an illustration of the
method of controlling the device.
•
Use the light switch to turn on the lighting:
»
I – Lighting is on,
»
O – Lighting is off.
Directions for use:
•
Do not place warmed up drinks in the device.
•
To ensure adequate air circulation, do not overfill the
device.
•
In the case of temporary power failure, it is advisable
not to open the door more often than necessary, so
as to avoid letting the cooled air out.
•
Depending on the quantity of stored products and the
ambient temperature, set the operating temperature
of the device using the temperature controller.
•
Increasing the cooling power to the maximum may
cause continuous operation of the device and create
a layer of ice inside the device. Avoid operating at
maximum cooling power.
•
If the device is not to be used for a long time, it should
be cleaned. If the device is no longer used without
cleaning, it may smell unpleasant or become mouldy.
Before storing the device for a longer time without
use, it is recommended to clean it and leave the door
open.
Rev. 11.04.2019
3.4. CLEANING AND MAINTENANCE
•
Before each cleaning, adjustment, replacement
of accessories and if the device is not used, it is
necessary to pull out the mains plug and cool the
device completely.
•
Use cleaners without corrosive substances to clean
each surface
•
Use only mild detergents suitable for washing surfaces
which come into contact with food to wash the device.
•
After cleaning the device, all parts should be dried
before reusing it.
•
Store the unit in a dry, cool place, free from moisture
and direct exposure to sunlight.
•
Do not spray the device with a water jet or submerge
it in water.
•
Remember to prevent water from penetrating inside
the device through vents in the housing of the device
•
Regular inspections of the device must be carried out
in terms of its technical efficiency and any damages
•
Use a soft cloth for cleaning.
•
Before first use, remove all elements and clean them
along with the entire device..
•
Use food-grade and non-scratch cleaning utensils. Do
not use sharp and metal objects.
•
Do not clean the device with an acidic substance,
agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage
the device.
Defrosting
Water evaporates inside the device and ice forms on its
walls. This is normal. If the layer of frost is more than 3 mm
(1/8 „) thick, the device should be defrosted and cleaned
to avoid unnecessary energy consumption and inefficient
operation:
1.
Remove all objects stored inside, disconnect the
device from the power supply and leave it open. It is
recommended to protect the floor around the device
from getting wet from melting ice.
2.
After defrosting the frost or ice-covered surfaces,
clean the device and let it dry.
3.
Reconnect to mains power.
4.
Set the cooling power to the maximum.
5.
Put products you intend to cool into the device.
6.
After about 4-6 hours, set the cooling power to
match the amount of products in the cooler.
Cleaning
1.
Disconnect the device from the power source.
2.
Clean the inside of the device with warm water and
a neutral detergent. To ensure its efficient operation,
thoroughly clean the rear and bottom part of the
interior of the device. Use soap and water to clean
the door seal.
3.
Thoroughly dry all surfaces.
4.
Reconnect the device to the power source.
DISPOSING OF USED DEVICES
Do not dispose of this device to municipal waste systems.
Hand it over to electric and electrical device recycling and
collection point. Check the symbol on the product, user
manual and packaging. The plastics used to construct the
device can be recycled in accordance with their markings.
By recycling you are making a significant contribution to the
protection of our environment. Contact local authorities for
information on your local recycling facility.
9
Tabla de contenido
