Stihl MS 150 TC Manual De Instrucciones página 33

starter grip snap back. Guide it
slowly back into the housing so that
the starter rope can rewind properly.
Starting the Saw
WARNING
Bystanders must be well clear of the
general work area of the saw.
Press the manual fuel pump bulb at
N
least nine times – even if the bulb is
already filled with fuel.
MS 150 TC
4
2
3
Push the hand guard (1) forward –
N
the chain is locked.
Press down the trigger lockout (2)
N
and pull the throttle trigger (3) at the
same time. Set Master Control
lever (4) to starting throttle
position (n).
Set choke lever to required position.
N
Choke shutter closed (l)
if the engine is cold (also use this
–
position if the engine stopped when
you opened the throttle after
starting)
Choke shutter open (j)
1
if the engine is warm, i.e. if it has
–
been running for about one minute.
Hold and start your saw as
N
described.
When engine begins to fire
Move the choke lever to the open
N
position (j).
Hold and start your saw as
N
described.
English
31