Menu Options; Dmx Linking - Chauvet DJ INTIMIDATOR SPOT 400 IRC Guía De Referencia Rápida

EN

Menu Options

Main Function
Address
Run Mode
Setup
Sys Info

DMX Linking

Starting
Address
Master/Slave
Connection
Programming Levels
001–512
DMX
Auto
Sound
Slave
IR
Pan Reverse
Tilt Reverse
Screen Reverse
Pan Angle
Tilt Angle
Sensitivity
Reset
Factory Set
Ver: VX.X
Running Mode: XXXXX
DmxAddress: XXX
Temperature: XXX
The Intimidator™ Spot 400 IRC can work with a DMX controller when
linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 499.
The Intimidator™ Spot 400 IRC uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this product
for Master/Slave operation are in the User Manual.
Intimidator™ Spot 400 IRC QRG
Sets the DMX starting address
14CH
Selects DMX mode
08CH
Selects Auto mode
Selects Sound-Active mode
Selects Slave mode
Selects infrared control
OFF
Normal pan operation
ON
Reverse pan operation
OFF
Normal tilt operation
ON
Reverse tilt operation
OFF
Normal display
ON
Reverse display
540
Selects the 540° pan angle range
360
Selects the 360° pan angle range
180
Selects the 180° pan angle range
270
Selects the 270° tilt angle range
180
Selects the 180° tilt angle range
090
Selects the 90° tilt angle range
001—100
Sound sensitivity control
Resets the product
Loads factory defaults
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the LED temperature in Celsius
7
Description