Festo NPE Serie Instrucciones De Utilizacion página 12

NPE-...
Using emergency buffers
S
Position the support in each case at dis-
tance s from the profile tube end in ac-
cordance with the operating instructions.
Axis type
Guide axis
FDG-...
Drive axis
DGE-18-...-SP-KF-GK
(drive cover A)
DGE-18-...-SP-KF-GK
(end cover B)
All other drive axes
In the case of fitting with sufficient play with regard to the position of the emerg-
ency buffers:
S
Place the shock absorber support over one of the fastening screws of the guide
rail.
This enables the support to be fitted positively without slip with the aid of the
locking sleeve included in delivery with the support.
S
Clean the surface of the support with a mild degreasing cleaning agent, e.g.
petroleum ether.
In an environment subjected to paint-wetting substances
1. Wash your hands thoroughly.
Otherwise traces of solvent agent will
loosen bound silicon out of the foil 3.
12
Definition
Drive cover = A
End cover = B
A
Distance s
Depends on the position on the drive axis
³ 7 mm
³ 0 mm
³ 0 mm
Fig. 5
Festo NPE-... 0102NH English
B