Intended Use - Nederman N3 Manual De Instrucciones

1 Preface
Read all product documentation and product identification plate carefully
before installation, use, and service of this product. Replace documentation
immediately if lost. Nederman reserves the right, without previous notice, to
modify and improve its products including documentation.
This product is designed to meet the requirements of relevant EC directives. To
maintain this status, all installation, maintenance and repair is to be done by
qualified personnel using only Nederman original spare parts and accessories.
Contact the nearest authorized distributor or Nederman for advice on
technical service and obtaining spare parts. If there are any damaged or
missing parts when the product is delivered, notify the carrier and the local
Nederman representative immediately.
2 Safety
This document contains important information that is presented as either a
warning, caution or note. See the following examples:
WARNING! Risk of personal injury.
Warnings indicate a potential hazard to the health and safety of personnel,
and how that hazard may be avoided.
CAUTION! Risk of equipment damage.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE! Notes contain other information that is important for personnel.
3 Description
3.1

Intended use

The fan and filter unit N3 is designed for filtering out smoke- and dust particles
as well as gases/vapours from solvents.
Application examples:
• Smoke and dust: Soldering, grinding, polishing. For these applications the
N3 unit can be used for jobs with low to mediumsized intensity. The N3
unit can also be used for soldering production jobs.
• Solvents: Gluing, lacquer-work (el.components), cleaning, painting. For
these applications the N3 unit can be used for temporary jobs with low
intensity.
N3 EN
English
User manual
9