Intended Use; Technical Specifications - Smartwares C704IP.2 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
Warning! Disconnect the device from all power sources before cleaning it.
!
!
Warning! Use a clean, dry cloth to clean the product.
Warning! Do not use any abrasive agents, corrosive cleaning products or any
!
substances that contain bleach or solvents to clean the product.
Warning! Remove the adapter from the power outlet during storms, lightning and
!
whenever the product will not be used for a longer period of time.
!
Please note! Install the product as indicated in this manual. If in doubt, consult
a recognised technician and always take account of local installation codes and
regulations.
!
Please note! The camera should be kept out of direct sunlight.
!
Please note! Do not point the camera at bushes, tree branches or other moving
objects.
!
Please note! The product must not be discarded as unsorted municipal waste, it must
be disposed of separately.
!
Please note! Find out about the options in your region for disposing of the product
after use. Do not throw away electrical appliances or components, but see whether the
product (components) can be turned in, recycled or reused.
!
Please note! Wireless systems can be affected by interference from wireless
telephones, microwave ovens and other wireless devices that operate in the 2.4
GHz range. Keep the product at least 3 metres away from any possible sources of
interference during installation and operation.
!
Please note! The camera is not able to view through glass at night. Keep this in mind
when positioning it.

2. Intended use

The C704IP.2 is a security camera that makes it possible to view surveillance images via a
local network, an Internet connection or the Elro App "ELRO INSTALL" on your smartphone.
The C704IP.2 can be connected either through an Ethernet cable or a Wi-Fi connection.
Two electrical rotary shafts let you rotate the camera 360 degrees remotely. You can also
choose for this to be done fully automatically.
The camera is equipped with infrared LEDS and is able to make video and audio recordings
both during the day and at night. The camera is also outfitted with motion detection and
can switch on and off via an I/O port.

3. Technical specifications

3.1. General product specifications
Sensor:
Resolution:
IR Lens:
Viewing angle:
Minimal brightness:
Video compression:
Images per second:
Power source:
Energy consumption:
Temperature:
18
1/4" Colour CMOS Sensor
640 x 480 pixels (300k pixels)
f: 6mm, F 2.0
60 degrees
0.5Lux @ F2.0
MJPEG
15fps(VGA), 30fps(QVGA)
230VAC/5VDC/2A Adapter
5W (Max.)
0°C ~ 55°C (32°F~131°F)
Tabla de contenido
loading

Tabla de contenido