Setup > Mac Address Clone; Setup > Advanced Routing - Cisco Linksys WRT54G2 Guia Del Usuario

Chapter3
DynDNS.org
Setup > DDNS > DynDNS
User Name
Enter the User Name for your DDNS account.
Password
Enter the Password for your DDNS account.
Host Name
The is the DDNS URL assigned by the DDNS
service.
Internet IP Address The Router's Internet IP address is
displayed here. Because it is dynamic, it will change.
Status
The status of the DDNS service connection is
displayed here.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
TZO.com
Setup > DDNS > TZO
E-mal Address, TZO Key, and Doman Name
settings of the account you set up with TZO.
Internet IP Address
The Router's Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed here.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Wreless-G Broadband Router
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification. Some ISPs will require
you to register a MAC address in order to access the
Internet. If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature.
MAC Address Clone
Enable/Dsable
Enable.
User Defned Entry
with your ISP here.
Clone Your PC's MAC
MAC address of the computer you are using.
Click Save Settngs to apply your changes, or click Cancel
Changes to cancel your changes.
Setup > Advanced Routing
This screen is used to set up the Router's advanced routing
functions. NAT routes the host Router's network connection
to the Internet. Dynamic Routing automatically adjusts
how packets travel on your network. Static Routing sets
up a fixed route to another network destination.
Enter the
Advanced Configuration
Setup > MAC Address Clone
To have the MAC Address cloned, select
Enter the MAC Address registered
Clicking this button will clone the
Setup > Advanced Routing (Gateway)
8