Selecting The Standard Display; Entering A Name - Sennheiser EM 550 G2 Manual De Usuario

Display
Name
24

Selecting the standard display

Via the "Display" menu, you can select the standard display:
Selectable standard display
"Main"
(standard display)
"Frequency"
(display of the frequency)
"Bank/Channel"
(display of the channel bank and
channel number)
"Name"
(display of the freely selectable
name)
"AF meter"
(graphic display of the AF level)
"Second RF"
(display of the RF levels of the two
diversity sections)

Entering a name

Via the "Name" menu, you can enter a freely selectable name for the receiver.
You can, for example, enter the name of the performer for whom the
adjustments have been made.
The name can be displayed on the standard display and can consist of up to
ten characters such as:
letters (without pronounciation marks),
numbers from 0 to 9,
special characters e.g. () - . _ and spaces.
To enter a name, proceed as follows:
Press the SET button to get into the setting mode of the "Name" menu.
The first segment starts flashing on the display.
With the / buttons you can now select a character. By briefly pressing
a button, the display jumps either forwards or backwards to the next
character. If you hold down a button, the display starts cycling
continuously.
Contents of the display