Safety Messages To Maintenance Personnel - Federal Signal Vitalite 121A Instrucciones De Instalación Y Mantenimiento

Installation and Maintenance Instructions
To wire the light:
1. Connect the black lead to the phase side of the power source.
2. Connect the white lead to the common (neutral) side of the
power source.
3. Connect the the green/yellow lead to earth ground.
4. Test the light for proper operation.

Safety Messages to Maintenance Personnel

Listed below are some important safety instructions and
precautions you should follow:
• Read and understand all instructions before operating this
system.
• Any maintenance to the light system must be done with the
power turned off.
• Any maintenance to the light system must be performed by a
trained electrician in accordance with NEC/CEC Guidelines
and local codes.
• Never alter the unit in any manner. Safety may be endangered if
additional openings or other alterations are made to units.
• The nameplate, which contains cautionary or other information
of importance to maintenance personnel, should not be
obscured.
• If the dome is damaged in any way, the complete dome
assembly MUST be replaced.
• After performing any maintenance, test the light system to
ensure that it is operating properly.
Failure to follow all safety precautions and instructions may result
in property damage, serious injury, or death.
Models 121A and 121S Vitalite
8
Rotating Light
®