H.Koenig OptiV8 Manual De Usuario página 9

The air inside the filter has been pumped out. If these abnormal conditions continue
happen for more than 60 seconds, please check whether water tank and filter assembled
correctly or not
C. When set selection button at "DRY" position, no steam escaped since it only just suits
for dry ironing.
Dry ironing
Connect the appliance to a suitable socket outlet, lay handle down. Power indicator
1.
light (red) on iron unit light up ,it indicates that the unit has been connected to
power supply.
Set selection button to desired position according to above fabric setting chart. Blue
2.
indicator light at iron unit blinks slowly to indicate the unit being heated up. When the
blue indicator light changes to light up steadily and an audible "Bi" signal produced, the
desired temperature has been reached. During use, blue indicator light will cycle from
blinking to light on steadily, and then from steady mode to On. lt does not indicate a
defects or hazard, it is just because the appliance is temperature constant.
After use, put iron unit back onto the base unit again, turn selection button to
3.
,and then unplug the appliance from main socket.
Note:
1. When changing your Temp setting from higher setting to lower, it is proposed
that not to start ironing immediately since it may cause burns to your fabrics. Please
wait till blue indicator light lights up steadily, and then start ironing.
2. This kind of iron has timing function. Press the steam button for 1 second at set intervals
abound 10 minute and the function will re-timing.
Application methods of vertical ironing:
Our special vertical ironing function makes the ironing for wrinkles on
hanging clothes curtains or wallpapers.
1. Setting the temperature at max gear, the iron can be used when the
indicator lamps lightened up.
2. Taking up the iron next to the cloth and pressing the steam button,
we can start to iron clothes.
Auto shut off function
If there are no actions has been made on the steam switch for about 15 minutes during use, the
iron will be power-off automatically, the temperature indicator light OFF and making a
'BEEP' sound 3 times. If u want to restart the iron, please press the temperature button again.