H.Koenig OptiV8 Manual De Usuario página 6

Fabric Setting Chart
Temperature
Setting
Fabric
lroning
Instruction
Steam
Selection
Ironing Temperature Setting Guide
Follow up the ironing instructions on the garment label. If there is not any
1.
instruction label, but you know what kind of the fabric is, please refer to the fabric
setting chart described in this instruction manuai.
The fabric setting chart is only validfor plain fabrics and not for materials to which
2.
finishes, glosses etc., have been applied. Textile to which some kind of finish has been
applied (gloss, crinkle, relief etc.) is best ironed at lower temperature
First sort laundry according to ironing temperature setting guide: wool with wool,
3.
cotton with cotton, etc.
The iron heats up more quickly than it cools down. Therefore, start ironing articles
4.
that need to be ironed at the lowest temperature, such as those made of synthetic
fibres.
If you do not know what kind of fabric the article is made of, iron a piece of the material which
5.
is not visible when you wear to find out the appropriate temperature for your articles.
When steam ironing woollen fabrics, shiny patches may occur. You may prevent this by
6.
turning the article inside out and ironing the reverse side.
After using of steam ironing for cotton fabrics, do not iron articles required by lower
7.
temperature (such as nylon etc.) immediately.lt is advisable to adjust the selection button to
the lower setting, waiting for about 2-4 minutes till the blue indicator light turn off, and then
you can start ironing.
IMPORTANT HINTS:
Do not fillwater tank with vinegar, perfume, starch, chemically descaled water or descaling
agents.
DRY ECO STEAM SUPREME STEAM
Synthetics, Synthetic,
Silk, Nylon, Wool
Arcrylic, Polyester
Acetate
Dry Steam
lroning lroning
/
Polyester Cotton
Linen
Wool
Steam lroning