Product Description; Control Panel; Cleaning And Care - V-ZUG Vertica Manual De Istrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30

Product Description

1 Hood Body
2 Glass Pane
3 Illumination
4 Metal Filter
5 Titanium Panels
6 Magnet Holder
7 Lower Tower
8 Upper Tower

9 Control Panel

Control Panel
The control panel consists of 6 symbols:
1. Exhaust Power
Control buttons: three levels (1 to 3) and an
intensive level „int".
Level 1 = lowest motor speed
Level 2 = middle motor speed
Level 3 = high motor speed
Level 4 = intensive level (motor switch to
level 3 after 5 minutes)
2. Automatic Cool Down Period
Press the button with the clock symbol on it
once and the exhaust hood will automatically
cool down from level 3 to level 1 and turn off
after approximately 15 minutes.
Illumination
Press the button with the light symbol to turn
on the illumination. The illumination is turned
off by pressing the button again. The
illumination is dimmed by pressing and
holding the button for a longer period.
Brightness is raised again by another long
press of the button.
4. Filter Cleaning Display
Clean the grease filter every 14 days. In the
event of heavier use, clean the grease filter
as soon as the „clock symbol" begins to
blink. Replace the cleaned filter and press
the cool down button (clock symbol) and
hold it for at least 5 seconds.

Cleaning and Care

Cleaning the Surface
Risk of Electrical Shock! Separate the
exhaust hood from the electrical supply by
removing the plug from the outlet or tripping
the fuse. Please make sure that no water
enters the device during cleaning. Early
cleaning of the surfaces prevents toilsome
removal of deep-rooted debris later. Please
only use standard detergent or all purposes
cleaners which are suitable for stainless
steel/aluminum surfaces. Never use
scouring cleaners or steel wool. After
cleaning the hood, treat the stainless steel
surfaces with an appropriate preserving
agent. In the event of painted surfaces, only
clean using a mild detergent and a very soft
cloth. Clean the glass front with a standard
glass cleaner and wipe it off with a soft cloth.
en
Tabla de contenido
loading

Tabla de contenido