Speaker Connections - Boston Horizon MCS 130 Manual Del Usuario

Speaker Connections

After your speakers are properly placed, you are ready to wire your system. First, turn off all system power. Use the speaker
wire include with the system to make your connections. Please see the illustration below for guidance connecting the wires
to the MCS 130 satellites and center channel.
For connection to your receiver please refer to its owner's manual.
Important!
To ensure the best performance observe polarities when making speaker connections, as shown
in the illustration. Connect each + terminal on the back of the amplifi er or receiver to the
respective + (red) terminal on each speaker. Connect the – (black) terminals in the same way.
If the connections are not made correctly it can cause poor bass response and imaging. Also,
to avoid short circuits that may damage your equipment be careful not to let any of the bare
wires touch each other.
Subwoofer Connections
Turn off all power. Use the subwoofer cable included with your system to connect the subwoofer to your receiver's
Subwoofer or LFE output. Connect the other end to the "Line In" on the back of the Subwoofer.
AUDIO/VIDEO
APPARATUS
86AC
.
Be sure to maintain proper +
and – polarity at all speaker
wire connections.
Speaker wires can be routed through
the channels on the back of the
speaker and the holes in the feet.
5