Worx WX801 Manual De Instrucciones página 16

Lock the spindle and assembling metal cutting disc/abrasive
cutting disc /grinding disc
NOTE: Press and hold the spindle lock button to lock
the spindle.
NOTE: Make sure that the metal cutting disc/abrasive
cutting disc /grinding disc is assembled firmly.
WARNING! Before any work on the machine itself,
remove the battery pack.
Lock the spindle and removing metal cutting disc/abrasive
cutting disc /grinding disc
Adjusting Wheel Guard for grinding/cutting
Note: Remove the battery pack before making any
changes to the tool. For work with grinding or cutting
discs, the protection guard must be mounted. Use the
correct type of disc for your application.
If the power tool is intended to perform any cut-off
operations, a guard specific for this operation must be
installed.
EN
Installing the Battery Pack
16
WARNING: Before inserting the battery pack, make
sure that the ON/OFF Switch is in OFF position.
WARNING: When replacing the battery pack, do not
insert the battery pack until the metal cutting disc/
abrasive cutting disc /grinding disc comes to a complete
stop!
OPERATION
Using On/Off Switch
Note: Depress the On/Off switch forward to lock-on
button. Your switch is now locked on for continuous
use.
Hand grip areas
Rough Grinding
WARNING! Never use a cutting disc for rough
grinding applications. This can cause bodily damaged
by using the tool for wrong applications.
Cutting
See Fig. B
See Fig. C
See Fig.
D1,D2,D3
See Fig. E
See Fig. F
See Fig. G
See Fig. H
See Fig. I