Display - hager TX 450 Manual De Empleo

Ocultar thumbs Ver también para TX 450:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 73
6
Configuration mode

6.2 Display

This menu is used to configure the data contained in the
central display.
Up to four lines or "zones" can be displayed. It is possi-
ble to add, delete or change a zone.
The Swap parameter enables the order of the zone
display to be changed.
I
To add a zone
• Select Add using the
touch pads.
• Press the
Select a zone.
When all the zones have been allocated, you must
first Clear an existing zone before a new zone can be
added.
I
To select a zone
Four zones are available.
These correspond to the lines avai-
lable in the central display.
• Select a zone using the
touch pads.
• Press the touch pad
the Data Display.
76
and
touch pad to access
and
to access
I
To display data
The following data can be displayed:
- Date
- Time
- Local temperature
- Lighting
- Heating
- Physical values
- Logical functions
- Other values
Before it can be displayed on the screen, the selec-
ted data must correspond with the EIB configuration.
For example, in order to display heating data on the
screen, the BCU must be configured to return to
heating status.
Date, time, local temperature
These 3 parameters are used in the same way.
In this example:
• Select Local temperature using
the
• Press the
The temperature and its icon
appear in the central display.
• Press the
The Room Controller then returns
automatically to the screen To
add a zone.
77
and
touch pads.
touch pad to confirm.
touch pad to confirm.
hager
Tabla de contenido
loading

Tabla de contenido