Electrical Connection; Operation - Franke COUNTRY FLAT CF 55 M /F Serie Manual De Instalación Y Servicio

Fig. 5a
Fit the appliance in the compartment; fix the oven
X X
to the cabinet with the 4 screws and the
4 bushings provided, using the holes prepared in
the side panels (Fig. 5a).
Note: If the oven is to be fitted under a cooktop,
firstly turn the top connection (R) to the right or left
so that the oven fits properly
(Fig. 5b).

Electrical connection

Franke ovens are supplied with a three-pole power
cable with free terminals. If the oven is permanently
connected to the power supply, install a device that
ensures disconnection from the power supply, with
a contact opening distance (at least 3 mm) enabling
complete disconnection in category III overvoltage
conditions.

OPERATION

This oven combines the advantages of "static"
natural convection ovens with those of modern
"fan" ovens. It is a very versatile appliance which
enables safe and easy selection of 5 different
cooking programmes. Use knobs (A) and (D) on the
control panel to select the required programmes
and temperature. For best use of your Franke oven,
consult the cooking table on page 10.
Cooling fan
In order to reduce the temperature at the door,
control panel and sides, the Franke oven is equipped
with a cooling fan which is automatically activated
when the oven is hot. When the fan is on, air blows
from the front of the oven between the front panel
and oven door; special attention has paid to ensure
that the exiting air does not disturb the kitchen
environment and that noise is kept to a minimum.
CF 55 M _/F
Make sure:
9 The plug and socket are suitable for a 16 A current.
9 Both can be easily reached and are positioned so
that no live part is accessible when inserting or
removing the plug.
9 The plug can be easily inserted.
9 The oven does not rest against the plug when
installed in the cabinet.
9 The terminals of two appliances are not
connected to the same plug.
9 A 3 x 1.5 mm² cable type H05VV-F is used when
replacing the power cable.
9 Make sure you observe the polarities of the free
terminals.
BLU
BLUE
GIALO-VERDE
YELLOW-GREEN
MARRONE
BROWN
L
Note: Make sure the characteristics of the
household electrical system (voltage, maximum
power and current) are compatible with those of your
Franke oven.
To protect kitchen units, the fan keeps running
after cooking until the oven has cooled down
sufficiently.
Oven light
This symbol corresponds to switching on of the
oven light without activation of any type of heating.
This option is useful for cleaning the oven when it is
switched off, to see the cooking compartment.
– 7 –
Brown = Live
Blue = Neutral
Yellow/Green = Earth
N
EN