Axis Q60 Serie Manual Del Usuario página 29

AXIS Q60 Series
5
1
Power cable (DC input)
2
Power connector (DC input)
3
Network connector SFP (external) (2x)
4
Network connector RJ45 (external) (2x)
5
I/O connector (external)
6
Multi-connector cable IP66
7
Ground screw
13. If applicable, connect an I/O device to the external I/O connector.
14. Connect the power cable (DC input) to the power connector (DC input)
15. Attach the ground wire to the ground screw.
16. If connecting several media converter switches in a daisy chain, set the dip switch of
each outgoing network connector port that connects to another media converter switch
to position C.
Leave the dip switch in its default position (position B) when connecting the port directly
to the network. For more information, see Media Converter Switch Connectors, on page
15 and the User Manual.
Important
If the system is not defined, use the default dip switch setting (position B).
7
6
1
2
4
29
3