GYS WATTMATIC 100 Manual Del Usuario página 8

Translation of the original manual
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid,
Connection / disconnection:
• Disconnect
• The terminal of the battery that is not connected to the car
• After the charging process, disconnect the battery charger
Connection:
• This device must be connected to an earthed power supply
• Class II device. (WATTMATIC 100)
• This machine is fuse-protected
Maintenance:
• If the power supply cable is damaged, it must be replaced
• Service should be performed by a qualified person
• Warning! Always remove the power plug from the wall
• If the internal fuse is blown, it must be replaced by the
• Regularly take off the cover and remove dust with an air
• Under no circumstances should solvents or other aggressive
• Clean the device's surfaces with a soft, dry cloth.
8
WATTMATIC 100.140.170
rinse the affected part of the body with plenty of water
and seek immediate medical assistance.
the
disconnecting the device to/from the battery
frame must be connected first. The other connection must
be made on the car frame, far from the battery and the
fuel line. The battery charger must be connected to the
power supply network.
from the power supply network and remove the connector
from the car frame and then the connector from the battery,
in this order.
(WATTMATIC 140 and WATTMATIC 170)
by the manufacturer, its service agent or an equally
qualified person.
socket before carrying out any work on the device.
manufacturer, its after-sales service or an equally qualified
person.
gun. Take the opportunity to have a qualified person check
the electrical connections with an insulated tool.
cleaning agents be used.
power supply before connecting/
EN