Maintenance And Cleaning - Moulinex PROMPTEO Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
1800113966 GM7070 PROMPTEO:1800113966 GM7070 PROMPTEO

Maintenance and cleaning

Cleaning your generator
• Do not use detergent or descaling products for cleaning the soleplate
base-unit.
• Never hold the iron or the base unit under the tap.
• Regularly clean the soleplate with a damp, non-metallic washing up pad.
• Clean the plastic parts of the appliance occasionally with a soft cloth.
Caution! Above all, you
must not use descaling
products to rinse the boiler:
they may damage it.
Before cleaning or
emptying your generator,
it is imperative that you
leave it to cool for more
than 2 hours, to prevent
any risk of burns.
Storing your generator
• Store the electrical cord in its storage place -
• Warning: do not touch the soleplate while still hot.
• Store the steam cord in the cord storage clip -
• Leave the iron (and the iron rest) to cool down for 30 minutes.
22
• Before proceeding, check that the generator is cool and unplugged for
more than 2 hours.
• Place your steam generator on the edge of your sink, with the iron to one side,
standing on its heel.
• Unscrew anti-clockwise a quarter of a turn the boiler rinse cap cover -
• Using a coin, gently unscrew the boiler rinse cap -
• Holding your steam generator in a tilted position, and using a jug, fill the boiler
with 1/4 litre of tap water -
• Shake the base unit for a few moments and then empty it completely into your
fig.11.
sink -
To obtain the best result, we recommend that this operation is done twice.
• Screw back and tighten up the boiler rinse cap with a coin.
• Put the boiler rinse cap cover back in place.
fig.12.
fig.14.
2/09/08
17:12
Before cleaning, ensure
your steam generator is
unplugged and that the
soleplate and the iron
have cooled down.
Rinsing the boiler
fig.9.
fig.10.
Page 22
fig.8.
Tabla de contenido
loading

Tabla de contenido