Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
i)
Keep packaging elements and small assembly parts
in a place not available to children.
j)
Keep the device away from children and animals.
k)
If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.3. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The machine may be operated by physically fit
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
d)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
e)
When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
f)
Use personal protective equipment as required
for working with the device, specified in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
g)
To prevent the device from accidentally switching on,
make sure the switch is on the OFF position before
connecting to a power source.
h)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
i)
Remove all adjusting tools or spanners before
turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
j)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
8
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
j)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
k)
Do not move, adjust or rotate the device in the
course of work.
l)
Do not leave this appliance unattended while it is in
use.
m)
Clean the device regularly to prevent stubborn grime
from accumulating.
n)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
o)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
p)
Keep the device away from sources of fire and heat.
q)
Do not overload the device.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The device is used to crush fruit.
The user is liable for any damage resulting from
unintended use of the device.
Rev. 19.12.2019
3.1. DEVICE DESCRIPTION
3.1.1 GENERAL DESCRIPTION
1
2
3
4
5
1.
Hopper
2.
Hopper mounting nut
3.
Chute
4.
Motor
5.
Rubber foot (x4)
6.
Stand
7.
Switch-on (green)/ switch-off (red) – unvisible on
the first illustration
8.
Emergency switch-off (unvisible on the first
illustration).
3.1.2. KNIFE CONSTRUCTION
A
B
B
C
Rev. 19.12.2019
EN
A.
Crushing blade
B.
Cutting blades
C.
Knife base
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
There should be at least 10 cm distance between each
side of the device and the wall or other objects. The device
should always be used when positioned on an even, stable,
clean, fireproof and dry surface, and be out of the reach
of children and persons with limited mental and sensory
functions. Position the device such that you always have
access to the power plug. The power cord connected to the
appliance must be properly grounded and correspond to
the technical details on the product label.
Disassemble all components and clean them before the
first use. Place a container or bucket under the chute to
collect processed products.
3.3. DEVICE USE
Before starting work, make sure that the hopper is correctly
attached to the base and that the device is correctly
connected to the power supply.
Open the emergency switch-off cover.
1.
Start the device by pressing the green „I" button and
then close the emergency switch-off cover.
2.
Wait a moment until the engine reaches full
rotational speed and then start to gradually throw
the fruit into the hopper.
3.
The processed product will be disposed of through
the chute.
4.
Before turning off the device, wait until all products
are processed, i.e. nothing will come out of the
chute.
5.
Open the emergency switch-off cover again and turn
the device off using the red „O" button.
CAUTION: never put fruit in the hopper before starting the
device or do not put too much of them at the same time - it
may overload the engine and/or the device may fail!
During operation, the emergency switch-off cover should
be closed so that it is easily accessible at any time!
Replacing the cutting blade:
Caution: it is recommended to use protective gloves.
1.
Remove the hopper from the base.
2.
Unscrew the blade from the knife base with
a screwdriver, turn it over and reinstall it to the knife
base by tightening it properly
3.
Insert the hopper and fasten it ensuring that all
screws are properly tightened.
3.4. CLEANING AND MAINTENANCE
a)
The device should be cleaned after each use to
prevent food residues from drying out inside.
b)
Before adjusting or changing accessories, or if the
device is not in use, pull out a mains plug and fully
cool the device.
c)
Wait for the rotating elements to stop.
d)
Use only mild, food-safe detergents to wash the
device.
e)
After cleaning the device, all parts should be dried
completely before using it again.
9
Tabla de contenido
