6 Connections
All connections should only be made by qualified,
skilled personnel and under any circumstances
with the unit switched off.
6.1 Connection to an amplifier
There are two possible ways to connect the unit to
an amplifier:
1. Connect the outputs PACK 1 (11) and PACK 2
(10) separately to one line input each of the
amplifier (e. g. input for CD player, tape
recorder). With the volume controls of the inser-
tions adjust the de sired volume.
2. To feed the mixing signal of both insertions to
the amplifier, connect the output "1 + 2" (9) to a
line input of the amplifier. With the volume con-
trols of the insertions adjust the desired volume
and the mixing relation or carry out fading in and
fading out.
6.2 Power supply and
emergency power supply
1) For continuous operation of the amplifier in case
of a possible mains failure, connect a 24 V emer-
gency power supply unit (e. g. PA-24ESP from
MONACOR) to the terminals 24 V (8).
Note: If the 24 V voltage from the emergency
power unit is present at the terminals 24 V , the
amplifier cannot be switched off with the switch
POWER (4). In case of a mains failure or if it is
switched off, it is automatically switched to the
emergency power supply.
2) Finally plug the supplied mains cable to the
mains connecting jack (5) first and then to a
mains socket (230 V~/50 Hz).
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.
7 Specifications
Outputs
PACK 1: . . . . . . . . . . . . 0 dBm, bal.
PACK 2: . . . . . . . . . . . . 0 dBm, bal.
1 + 2: . . . . . . . . . . . . . . . 0 dBm, bal.
Power supply
mains voltage: . . . . . . . . 230 V~/50 Hz
power consumption: . . . 55 VA
emergency
power supply: . . . . . . . . 24 V
DC power consumption: 2 A
Dimensions (W × H × D): . 482 × 89 × 380 mm,
Weight: . . . . . . . . . . . . . . . 4.5 kg
Subject to technical modification.
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction
2 rack spaces
GB
7