Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ALWAYS TEST TO BE SURE THE ADF CARTRIDGE IS CHARGED
BEFORE WELDING. The TEST button is for the user to verify the ADF
cartridge is darkening properly. If cartridge is not darkening properly, replace
batteries with fresh batteries and test again before use. While welding, the
arc and solar cell will keep the ADF charged.
OPERATION
NT 1
Shielded metal arc
welding
Gas metal arc
welding and flux
cored arc welding
Gas tungsten arc
welding
Air carbon
Arc cutting
Plasma arc welding
Plasma arc cutting
Torch brazing
Torch soldering
Carbon arc welding
Gas welding
Light
Medium
Heavy
Oxygen cutting
Light
Medium
Heavy
(1)
As a rule of thumb, start with a shade that is too dark, then go to a lighter shade which gives sufficient view of the weld zone without going
below the minimum. In oxyfuel gas welding or cutting where the torch produces a high yellow light, it is desirable to use a filter lens that absorbs
the yellow or sodium line the visible light of the (spectrum) operation
(2)
These values apply where the actual arc is clearly seen. Experience has shown that lighter filters may be used when the arc is hidden by the
workpiece.
If your helmet does not include any one of the shades referenced above, it is
Data from ANSI Z49.1-2005
recommended you use the next darker shade.
SHADE GUIDE SETTINGS
GUIDE FOR SHADE NUMBERS
ELECTRODE SIZE
1/32 in. (mm)
Less than 3 (2.5)
3-5 (2.5–4)
5-8 (4–6.4)
More than 8 (6.4)
(Light)
(Heavy)
(2)
(Light )
(2)
(Medium)
(2)
(Heavy)
PLATE THICKNESS
in.
Under 1/8
1/8 to 1/2
Over 1/2
Under 1
1 to 6
Over 6
.
ARC
CURRENT (A)
Less than 60
60-160
160-250
250-550
Less than 60
60-160
160-250
250-500
Less than 50
50-150
150-500
Less than 500
500-1000
Less than 20
20-100
100-400
400-800
Less than 300
300-400
400-800
–
–
–
mm
Under 3.2
3.2 to 12.7
Over 12.7
Under 25
25 to 150
Over 150
2
SUGGESTED ( 1 )
MINIMUM
PROTECTIVE
SHADE NO.
SHADE
(COMFORT)
7
–
8
10
10
12
11
14
7
–
10
11
10
12
10
14
8
10
8
12
10
14
10
12
11
14
6
6 to 8
8
10
10
12
11
14
8
9
9
12
10
14
–
3 or 4
–
2
–
14
4 or 5
5 or 6
6 or 8
3 or 4
4 or 5
5 or 6
Capítulos
Tabla de contenido
