Kohler K-8034 Guia De Instalacion página 13

Pipe Nipple
Light Panel
Assembly
6. Install the Pipe Nipples and Light Panel
CAUTION: Risk of personal injury or product damage. If
the rain panel is not securely held in place during
installation, product may fall causing personal injury or
property damage. Get help when installing the light panel
assembly and waterways.
Remove the nipples.
Apply thread sealant to the threads of the nipples.
Reinstall the nipples to the tees/elbows.
Run water through the system to flush out any dirt or debris.
IMPORTANT! The following steps require two people.
Lift the light panel up to the installation location and attach the
pre-routed chroma power cable to the light panel assembly.
Insert the light panel into the rough opening of the finished
ceiling and hold in place. The light panel must be supported until
it is secured by installing the adapters.
Kohler Co.
Finished
Ceiling
Chroma
Power Cable
13 1078520-2-C