Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Use at fixed position,
replacing nozzle and
shutting down
Use at fixed position
Connecting method of hose when sucking water
from the separate tank in case of operating at fixed
position. (Hose, strainer, etc., are optional
accessories.)
(1)Remove suction and spillway hose from the
tank.
(2)Insert respective hose connection into suction
and spillway hose, and fix them using plate
Replacement nozzle
(1)Round nozzle 25 (Optional accessory)
Exclusive nozzle for rounding up weed
remover.
(2)Replacement nozzle tip C-35 (Optional accessory)
a. Using replacement nozzle tip, about 1.5
times of spray volume is available compare
to standard nozzle.
b. When large volume of spray or large volume
of spray at low pressure is necessary,
this replacing nozzle can be used.
c. C-35 is indicated on the surface of replacement
nozzle tip.(D-6 is standard)
d. Replacement can be done by loosening
the screw of the nozzle cap. When replacing,
stop the machine. Close ball cock.
10
Ｅｎｇｌｉｓｈ
Tabla de contenido
