Dyna-Glo Signature Serie Manual De Usuario página 63

ASSEMBLY INSTRUCTIONS
7. Attach the side handle (E) to the adapter plate (M)
using two M6 x 12 bolts (AA) and two M6 nuts (BB).
Use two M6 x12 bolts (AA) and two M6 nuts (BB)
for filling the two holes on the bottom section of
the firebox (K).
Note: This grill is also compatible as an offset
smoker box. The bottom holes are pre-drilled for
use with a support bracket (not included). For
more information on using this grill as an offset
smoker box, see Page 13.
Hardware Used
AA M6 x 12mm
Bolt
BB M6 Nut
8. Attach the other side handle (E) to the top section
of the firebox (L) using two M6 x 12 bolts (AA)
and two M6 nuts (BB).
Hardware Used
AA M6 x 12mm
Bolt
M6 Nut
BB
x 4
x 4
x 2
x 2
9
7
M
E
AA
8
BB
BB
K
L
E
AA