Tabla de contenido
Idiomas disponibles
Idiomas disponibles
†
On the 2-port Switch:
1) Press and hold down both manual port switches on
the front of the KVM and hold down for 5 seconds.
Auto Scan will be initiated.
2) Once scanning begins, it continues until you press
one of the manual port switches on the front of the
KVM.
†
On the 4-port switch:
1) Press and hold down the Num Lock key.
2) Press and release the Asterisk key or the Minus key.
3) Release the Num Lock key:
[Num Lock] + [*]; or: [Num Lock] + [-];
Note: The Asterisk or Minus key must be released
within one half second, otherwise Hot Key activation
is canceled, and it has no effect. The Caps Lock and
Scroll Lock LEDs on the keyboard will flash in
succession. They stop flashing and revert to normal
status when you exit Hot Key Mode.
4) Press and release [A].
Once scanning begins, it continues until you press
[Esc] or [Spacebar] to exit Auto Scan Mode. The Port
that is active at the time scanning stops remains active.
†
Note: While Auto Scan Mode is in effect, ordinary
keyboard and mouse functions are suspended. You
must exit Auto Scan Mode in order to regain normal
control of their use.
Skip Mode (4-port unit only):
This feature allows you to skip from the currently active
Port to the Previous or Next one with a single key-
stroke. In contrast to Auto Scan Mode (which switches
Ports at a fixed interval), you can maintain activation on
a particular port for as long or as little as you like.
8
To activate Skip Mode:
1) Press and hold down the Num Lock key.
2) Press and release the Asterisk key or the Minus key.
3) Release the Num Lock key:
[Num Lock] + [*]; or: [Num Lock] + [-];
Note: The Asterisk or Minus key must be released
within one half second, otherwise Hot Key activation
is canceled, and it has no effect. The Caps Lock and
Scroll Lock LEDs on the keyboard will flash in
succession. They stop flashing and revert to normal
status when you exit Hot Key Mode.
4) Press [
] to skip from the current port to the port
that comes before it (3 to 2; 2 to 1, etc.).
5) Press [
] to skip from the current port to the port
that comes after it (1 to 2; 2 to 3, etc.).
Note: 1) Skip Mode remains in effect until you exit
it. You can use [
] and [
Ordinary keyboard and mouse functions are
suspended— only [
] and [
must exit Skip Mode in order to regain normal
control of the console.
6) Pressing [Esc] or [Spacebar] exits both Skip Mode
and Hotkey Mode.
] as often as you like.
] can be input. You
9
Tabla de contenido
