Usage; Taking And Storing Photos On The Server - THOMSON DSC-523W Manual De Instrucciones

Motorised 720P Hd WiFi iP caMera
Once the Thombox has finished searching, click on
the X to close the window.
STEP 3: Automatic configuration
Optional: If you have already changed the
username and password for your camera
before pairing (by default, «admin» and no
password):
To access your camera and the camera image your
Thombox must have the username and password
that you selected when configuring the camera.
Go to the «Cameras» section of the Thombox
interface then below your camera, click on
«Modify the information associated with the
camera»
:
In the window that appears, replace the
«Username» and the «Password» with the terms
you want to use to access the camera configuration
(by default, «admin» and no password). Click on
«Save» at the top of the screen to apply
the changes (clicking the «Save» button does not
close the window).
To configure your camera automatically and instruct
the camera where to send the photos taken, launch a
synchronisation and wait.
h - uSiNg ThE prOduCT WiTh A ThOMBOX

2 - USAGE

Once synchronisation is complete, go to the
«Cameras» section of the Thombox interface
1 2 3
1 Access to Thombox camera configuration
2 Update to the thumbnail if a new photo has
been sent
3 Access to internet camera configuration
4 Instant photo capture. Right click to save the
photo to your computer.
5
Launch live video
6 Access all photos stored on the server in list
format
7 Deleting the camera
8
Latest photo stored on the server. Clicking in
this zone launches a slideshow.
3 - TAKING AND STORING PHOTOS ON THE
SERVER
Once the Thombox has recognised the camera, rules
can be used to trigger taking a photo and sending
the photo to the secure server. Your camera appears
in the «Cameras» category in the «Modules» of the
rule creator. You can drag the camera to an «Action»
block and select the «Snapshot» action to take a
photo.
4 5 6 7
15
:
8
en