Sensor Diagnostics Menu; Sensor Setup Menu; English - Hach PHOSPHAX sc Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39
Section 5

5.1 Sensor diagnostics menu

SELECT PHOSPHAX sc (if more than one sensor or analyzer is attached)
PHOSPHAX sc
Error list
Warning list

5.2 Sensor setup menu

SELECT PHOSPHAX sc (if more than one sensor or analyzer is attached)
Calibration
Correction Factor
Location 1
Gain correction
Location 2
Gain correction
Intrinsic color
Extinction factor
Offset
Reset setup
Settings
Location 1
Name
Parameter
Unit
QUANTITY CH 1
Discarded
measurements
channel 1
Location 2
Name
Parameter
Units
QUANTITY CH 2
Discarded
measurements
channel 2

English

Operation
For more information on System Setup (current outputs, relays, and
network interfaces), refer to the sc1500 User Manual.
Displays all errors currently present in the sensor
Displays all warnings currently present in the sensor
Displays the locations and correction factors
Displays location1 from Settings
sets correction factor for channel 1
On 2-channel version
On 2-channel version
Displays the zero extinction
Displays the internal device factor
can be used to slightly correct measurements which are close to Zero
Resets the user-editable options to their factory-defaults
Settings for location 1
Enter the name for the measuring location as required.
Output can be set as phosphate or phosphate-phosphor.
Output in mg/lL or ppm.
Number of measurements in succession ( = measurements on channel 1 +
DISCHARGE VAL 1 channel 1). Available with the 2-channel version.
Number of discarded values after switching from channel 1 to channel 2. Available with the
2-channel version.
Settings for location 2
Enter the name for the measuring location as required (on 2-channel version).
Output can be set as phosphate or phosphate-phosphor (on 2-channel version).
Output in mg/l or ppm (on 2-channel version).
Number of measurements in succession ( = measurements on channel 2 +
DISCHARGE VAL 2 channel 2). Available with the 2-channel version.
Number of discarded values after switching from channel 2 to channel 1. Available with the
2-channel version.
English
5
Tabla de contenido
loading

Este manual también es adecuado para:

Phosphax indoor sc

Tabla de contenido