Post Installation Checklist; Start Up - Bertazzoni REF75PIXL Guia De Instalacion

6. COMPLETING THE INSTALLATION
6.3 Air circulation
The air intake and outlet must not be blocked or cove-
red in any way. They also need to be dusted/cleaned on
a regular basis.
6.4 Post installation checklist Air circu-
lation
Check that the front levelling feet have been properly
installed.
Check that the connection to the water system does
not have any leaks and that the closing tap is easily ac-
cessible.
Check that the electrical connection is correctly in-
stalled and that the multipole switch and socket are
easily accessible.
Check the perfect alignment of the appliance with
adjacent structures.
MOD. 7491TST
1TST Check that all adhesive tape and external or internal
B02900100
temporary protective devices have been removed.
A
Check the perfect closing of the doors and the smo-
oth sliding of the drawers and shelves.
20
MOD
MOD. 7491TST
A
A
MOD. 7491TST
A
MOD. 7491TST
A
B02900100
B02900100
A
Testo e gra ca
www.universal.bertazzoni.com
Testo e gra ca
Testo e gra ca Testo e gra ca

6.5 Start up

>
To start the appliance, connect the plug to the elec-
trical mains: at this point, when opening the door,
the control panel will usually visualize the message
"Stand by", and all the panel keys be off
> To turn on all the appliance compartments, press the
Unit button for three seconds. The display will show
the message "Initial test" for approx. 2 minutes. After
this phase the compressors will start up and remain
on until the default temperature set up in the factory
is reached. Do bear in mind that this condition could
last several hours during which time the display will
continue to flash the 'Start Up Phase' message.
If the appliance is provided with an Ice Maker, prior to
switching it on make sure that the water filter cartrid-
ge is installed (unless water supply source is already
filtered by other means such as reverse osmosis).
Purge air from the water lines by enacting the 'Manual
Clean' function from the Menu->Functions->Water
Filter options. You may need to complete this sequen-
ce several times until you stop hearing air sputtering
from the ice maker fill tube.
Once you are satisfied that the system is purged of
air switch the Ice Maker on by touching the
which will illuminate.
Note
If the FlexMode drawer is configured as a Frid-
ge or a Fresco compartment the ice maker will
be disabled. Default mode for the FlexMode
drawer is Freezer.
MOD
A
1
B02900100
2
Testo e gra ca
B02900100
3
B
B02900100
4 Parti retro-illuminate - la parte nera è trasparente
C
5
6
7
bianco EB 61 - 62 li
8
9
Fondo o ultimo passaggio:
bianco EB 61 - 62 li
passaggio di nero coprente 602 -95 li
bianco EB 61 - 62 li
forato solo per le parti retro illuminate come da disegno "C"
bianco EB 61 - 62 li
Fondo o ultimo passaggio:
Nomenclature: Grigio Whirlpool
Fondo o ultimo passaggio:
B02900100
bianco EB 61 - 62 li
1 2 3 4 5 6 7 8 9
Fondo o ultimo passaggio:
passaggio di nero coprente 602 -95 li
Switches the appliance (all compartments) between ON and STAND BY
Unit forato solo per le parti retro illuminate come da disegno "C"
(press for three seconds).
Nomenclature: Grigio Whirlpool
Allows switching on and off of only the refrigerator compartment
Fridge
(press for three seconds).
Menu
Allows access to the appliance function menu
Up/down Using the Up and Down buttons, it is possible to change the set tempera-
Fridge
ture of the refrigerator and navigate through the interactive menu.
It shows the temperature of the refrigerator and freezer compartments,
Display
the date and time, Menu functions and visual messages.
bianco EB 61 - 62 li
Up/Down
By selecting Up/Down the preset temperature can be changed accord-
Freezer
ing to the selected function mode (freezer, refrigerator, Fresco-Fresco).
(TriAction)
bianco EB 61 - 62 li
Fondo o ultimo passaggio:
Enter Confirms activation or deactivation of the selections made in the Menu.
passaggio di nero coprente 602 -95 li
Ice maker Allows activating or deactivating the automatic ice production.
Fondo o ultimo passaggio:
forato solo per le parti retro illuminate co
Blinks to signal user alerts such as door left open, also in combination with
Alarm
a sound signal which can be deactivated by pressing the button.
passaggio di nero coprente 602 -95 li
forato solo per le parti retro illuminate come da disegno
Nomenclature: Grigio Whirlpool
Nomenclature: Grigio Whirlpool
button
bianco
bianco EB 61 -
Fondo
Fondo o ultim
passag
passaggio di n
forato
forato solo pe
Nomen
Nomenclature