Control Panel - Alliance Laundry Systems HC18SN2 Operación Y Mantenimiento

Control Panel

Figure 2 shows the control panel for S, P and
V-computer machines.
Up Down
8
1 Out-of-Balance Condition for VCV, VXV
2 High Water Level
3 Medium Water Level for V-Series
4 Low Water Level
5 LED Display
6 Keys for Standard OPL
7 Keys for Icon OPL
8 Keys for VC2, VCV, VX2, VXV
Figure 2
F232137
Operation
3
2
1 4
5
6
Start Stop
7
B161R
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
The Up
selection. Press these keys to move among cycles from
smaller to greater, or greater to smaller.
The Start
The Stop
Mode. In Run Mode it is used only for stopping test
cycle.
The LED display informs operator of various
functions throughout operation of machine. Refer to
tables on the following pages for displays and their
meanings. Indicator lights in LED display indicate
out-of-balance conditions and water levels. Refer to
Figure 2.
B161R
and Down keys are used in cycle
key is used to start a cycle.
key is not active in normal Run
7