BABYTREND HC57 C Serie Manual De Instrucciones página 4

ASSEMBLY
2) • Squeeze the Release Handles on both
sides simultaneously and push the tube
through the Height Adjusters until it locks
in the highest position (Fig. 2).
3)
• Connect the Front and Rear Legs to the
Upper Frame Assemblies by inserting
the tube ends into the extension tubes
Separate the A and B tubes (Fig. 3a).
Facing the front legs the A tubes connect
to the left leg and B tubes connect to
the right leg. Facing the rear legs A
tubes connect to the left leg and B tubes
connect to the right leg (Fig 3b).
NOTE: Legs are properly connected
when the lock buttons are lined up with
the holes on the ends of the Upper
Frame Assemblies. Make sure the lock
buttons are engaged before use.
5
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Release Handle
Fig. 2
A B A B
Fig. 3a
A
Extension Tubes
B
B
A
Rear Leg
Front Leg
Fig. 3b
TO ASSEMBLE BOOSTER SEAT
• ONLY approved SNAP TECH products can be
TM
used on the frame.
4) • Slide Footrest posts into the front of the
Seat until it clicks into place (Fig. 4a).
• Connect the Seat and lock into place
(Fig. 4b). Pull up to make sure it's locked
firmly in place before use (Fig. 4c).
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 4a
Fig. 4b
Fig. 4c
6