Fold / Unfold - BABYTREND JG35A Manual De Instrucciones

FOLD / UNFOLD

TO REMOVE INFANT CAR SEAT
• To remove the Infant Car Seat, unstrap
16)
the short clips from each belt slot and
squeeze the release handle located at
the foot-end of the seat and carefully lift
upward on the seat (Fig. 16).
NOTE: Raise the support tabs when the
car seat is not in use.
TO FOLD STROLLER
WARNING:
must be taken when folding
and unfolding the stroller to
prevent finger entrapment.
CAUTION:
allow children near stroller
while folding.
• Place the seat in the furthest recline
17)
position (step 5). Close the canopy as
described in the canopy section
(step 6).
• Fold the stroller by pulling both release
triggers (Fig. 17a). Press downward
on the stroller handle until the stroller
is completely folded. Lock the release
lever on the right side of the stroller
(Fig. 17b).
15
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 16
Care
Do not
Fig. 17a
Fig. 17b
TO UNFOLD STROLLER
CAUTION:
Do not
allow children near stroller
while unfolding.
• Unlock the release lever (Fig. 18a)
18)
and unfold stroller frame by pulling
backward on the stroller handle
until the frame locks (Fig. 18b).
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL
INSTALLATION
WARNING:
ALWAYS check the double
nut locking system before
each use to ensure that
the front wheel is securely
fastened to the frame.
• Push the lever on the wheel
19)
upward to engage the lock
(Fig 19a).
• Lift the front wheel off of the
ground and sharply strike the top
of the tire (Fig. 19b). The wheel
should not be loose or come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits
FOLD / UNFOLD
Fig. 18a
Fig. 18b
Lock
Unlock
Fig. 19a
Fig. 19b
réservés.
16