Important Information; Before Connecting Your Appliance - BALAY 3XM400B Instrucciones De Uso

Environmental protection
• It is recommended that you follow the
manufacturer's instructions concerning
the air expulsion tube (see "Ways of
releasing air outdoors") in order to
prevent efficiency loss and unnecessary
energy consumption.
• Avoid sharp bends on the air expulsion
tube and do not lengthen it more than
necessary.
• When expelling hot air through sliding
windows, install the accessory which
prevents hot air entering the room from
outdoors and enhances efficiency.
• Check that the sleeves (collection and
diffusion) are correctly joined to the air
expulsion tube. See "Ways of releasing
air outdoors".

Important Information

Before connecting your appliance

• Read the instructions book before using
the appliance for the first time. It
contains important information
concerning not only how to use the
appliance, but also maintenance and
personal safety.
• Keep this instructions book. It may be
needed by another user at a later date.
• Do not use the appliance when
damaged.
• Your appliance should be assembled
and connected to the mains electricity
supply in accordance with the assembly
instructions and current regulations. You
may lose your warranty if you fail to
observe these instructions.
• Make sure that the diffusion duct is
positioned in such a way that the
window can be closed as far as possible
in order to prevent air from outdoors
entering the room.
• Make sure that the air intakes and
outlets are not obstructed. Keep them
clean and free of dirt, dust and foreign
objects.
• Make sure that the filters fitted on your
appliance are clean and installed
properly (see "Cleaning and
Maintenance").
• In the summer, ventilate the building
when the air outdoors is at its coolest
(early morning, night).
• Our appliances are manufactured in
accordance with current safety
regulations. Only technicians instructed
in these matters are authorised to repair
them. Your safety is at stake.
• Make sure that the drainage plug is fully
inserted. It may have come loose during
transportation, Fig. 1.
Fig. 1
35