System Features - Dell PowerEdge 2950 Guia De Inicio Rapido

Ocultar thumbs Ver también para PowerEdge 2950:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

System Features

The major hardware and software features of your system include:
One or two Dual-Core Intel
Support for symmetric multiprocessing (SMP), which is available on systems with two Intel Xeon
processors. SMP greatly improves overall system performance by dividing processor operations
between independent processors. To take advantage of this feature, you must use an operating
system that supports multiprocessing.
NOTE:
If you decide to upgrade your system by installing a second processor, you must order the
processor upgrade kits from Dell. Not all versions of the Intel Xeon processor will work properly as
additional processors. The upgrade kit from Dell contains the correct version of the processor, heat sink,
and fan as well as the instructions for performing the upgrade.
A minimum of 512 MB of 533 or 667 (when available) MHz, Fully Buffered DIMMs (FBD),
upgradable to a maximum of 32 GB by installing combinations of 256-MB, 512-MB, 1-GB, 2-GB,
or 4-GB memory modules in the eight memory module sockets on the system board.
The system also features redundant memory, which provides memory sparing or memory
mirroring. Either feature is available if eight identical memory modules are installed.
Support for up to six 3.5-inch, internal hot-pluggable Serial Attached SCSI (SAS) or SATA hard
drives without optional media bay, or up to four 3.5-inch internal hot-pluggable SAS or SATA hard
drives with optional media bay, or eight 2.5-inch internal hot-pluggable SAS hard drives.
The optional media bay (available with the 3.5-inch x4 and 2.5-inch x8 backplane configurations)
provides support for an optional half-height tape backup unit (TBU) and an optional single,
1.44-MB, 3.5-inch diskette drive.
An optional slim-line IDE CD, DVD, or combination CD-RW/DVD drive.
NOTE:
DVD devices are data only.
An intrusion switch that signals the appropriate systems management software if the top cover is
opened.
Up to two hot-pluggable, 750-W power supplies in an optional 1 + 1 redundant configuration.
Four hot-pluggable system cooling fans.
®
®
Xeon
Processors 5000 Sequence.
Getting Started With Your System
3
Tabla de contenido
loading

Este manual también es adecuado para:

Ems01

Tabla de contenido