Configuration - AKO 16524A Guía Rápida

Configuration

Condensed programming menu
This allows for the most-used parameters to be quickly configured. Press the SET key for 3 seconds to access it.
Condensed programming menu
OUT OF
PROGRAMMING
Temperature
indication
Parameters
Description
SP Temperature setting (Set Point)
CE
SELFDRIVE Mode 0=Deactivated 1= Activated
C1
Probe 1 differential (Hysteresis)
d0 Defrost frequency (Time between 2 starts)
d1 Maximum defrost duration (0=defrost deactivated)
d4
Final defrost temperature (by probe) (If P4 ¹ 1)
F3
Status of the fans during the defrost 0=Shut down; 1=Running
A1 Alarm for maximum in probe 1 (It should be higher than the SP)
A2
Alarm for minimum in probe 1 (It should be lower than the SP)
d30 Defrost strategy in SELFDRIVE mode
* According to wizard.
20 sec.
Parameters OK
3 seg.
Change
parameter
OK
26
IN PROGRAMMING
Values
Change
value
OK
20 sec.
Values Min.
ºC/ºF
ºC/ºF
H.
Min.
ºC/ºF
ºC/ºF
ºC/ºF
1652H4A11 Ed.07
Def. Max.
-50 0.0 99
0 1 1
0.1 2.0 20.0
0 6 96
*
0 255
-50 8.0 C2
0 0 1
A2 99 99
-50 -50 A1
0 5 10