Tabla de contenido
14
Precautions for Connecting to Other Medical Devices
Take the following precautions before using this product or connecting it to other medical devices.
•
Stop using this device for medical purposes if you experience interruptions or discomfort in executing medical
activities.
•
Quick movements, shaking and the focus of the video displayed on the monitor, its distance from the user, the user's
point of view, the user's physical fitness and other factors may cause discomfort (eye fatigue, dizziness, vomiting,
nausea, etc.).
•
Before using the product, check that the image of the connected device displays properly on the screen of this
product.
Precautions for Use with Electric Scalpels, etc.
•
When this product is used with electric scalpels, etc., the image may appear unstable, distorted or abnormal due to
the strong electromagnetic waves or voltage emitted by the device. This is not a malfunction.
•
If you are using this device with equipment that emits strong radio waves or voltage, install this device in a direction
that minimizes radio wave interference.
Recommendation for Using Multiple Units
•
Electronic products may fail unexpectedly. If using the monitor for medical, emergency or any other critical use, we
strongly recommend that you use multiple monitors or have a spare monitor ready.
Precautions When Cleaning the Product
The medical LCD monitor's front protective panel has been specially processed to reflect less light.
Using solvents such as thinner or benzene, acidic, alkaline or corrosive detergents, chemical cleaning fibers, etc. may
damage the finish material on the surface.
•
Unplug the power cord before cleaning.
•
Never spray water directly onto the monitor or use thinner or benzene solvents, acidic, alkaline or corrosive
detergents, or cleaning or sterilizing chemical cleaning fibers, etc. as they may damage the product.
•
To clean the product, unplug the power cord and wipe it gently with a soft cloth. Do not spray with water or wipe
with a wet cloth. When cleaning the product or the screen, do not use cleansers, automobile or industrial thinners,
abrasives or wax, benzene, alcohol, etc., as this may damage the product.
•
To clean the front frame, spray water onto a soft cloth two to four times and wipe in one direction only.
•
Do not rub the product with a stained cloth using more force than necessary. This may scratch the surface of the
product.
•
Do not allow the product to remain in contact with rubber or vinyl resin for extended periods. The surface finish may
deteriorate or the coating may peel off.
•
If you do not clean the product, dust will accumulate inside and may create a fire hazard or malfunction.
Tabla de contenido
