Tabla de contenido
6
English
06857xx0 Installation
Place the faucet and sealing washer on
the mounting surface.
If the mounting surface is less than 1⅜",
install the plastic washer, fiber washer,
friction washer, and mounting nut.
If the mounting surface is greater than
1⅜" or if there is insufficient space, omit
the plastic washer.
Tighten the mounting nut. Tighten the
tensioning screws.
Connect the hot and cold supply lines to
the stops.
Use two wrenches, as
shown, to prevent the
supply hoses from twisting.
For proper operation of the faucet, the
hot supply should be on the left, and the
cold supply should be on the right.
Turn on the water and check all connec-
tions for leaks.
Tabla de contenido
